High Power Wire Wound Resistor Type TE Series Test MethodElectrical Type TE Series Test Item Life (Moisture Load): Short Term Overload: Flammability: Insulation Resistance: Voltage Resistibility: Resistor Strength: Terminal Strength: Specification 40C 95% RH 1000 hour on-off cycle 3 x rated wattage, 5 seconds 16x rated power, 5 minutes DC 500V AC 2500V 1 minute 200N, 30 seconds Ual: 45N, 30 seconds Test Details R 3.0% No Flames Over 100M Free of damage or flying arc Free of visible damage Free of visible damage R (1%R + 0.05) Tyco Electronics is a leading supplier of standard and customdesigned power resistors for SpecificationsElectrical industrial, control and generalpurpose applications. Resistance Range (Ohms) Selection Series Tolerance The TE range of Mullite coated tubular ceramic core resistors have See Resistance Range Chart below E12 +/-5%, +/-10% as per Resistance Range Chart below a corrugated ribbon element for Type rapid cooling effect to enable up to 2500W power handling capability. Designed for heavy Resistance Value R10 - R99 1R0 - 2K7 R10 - R99 1R0 - 2K7 R10 - R99 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 1R0 - 2K7 50W duty machinery, electrical equipment, 60W motor control etc. requiring stability and reliability. 80W 100W 120W 150W 200W 300W 400W 500W 600W 750W 1000W 1200W 1500W 2000W 2500W Key Features Mullite Coated Up to 2500W Power Rating Corrugated Ribbon Element for Rapid Cooling 3x Overload for 5 Seconds Custom Terminations / Leads Available Flameproof Construction Tolerance 10% 5% 10% 5% 10% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Characteristics Environmental Applications Large Electrical and Production Machinery Load Test Simulation Motor Start/Stop Cycles Dynamic Braking Equipment Discharge Temperature Coefficient of Resistance: Rated Power Free Air: Operating Temperature Range Within 440ppm/C 50 to 2500 Watts -25C to +225C Rated Ratio of Power Loss (%) Derating Curve 100 80 60 40 20 0 -55 0 50 100 150 200 250 300 350 400 Ambient Temperature (C) Literature No. 9-1773453-2 Issued: 12-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com High Power Wire Wound Resistor Type TE Series 400 Increase in Temperature (C) Temperature Rise 300 200 100 0 0 50 Load Ratio (%) 100 Dimensions Rated Power (W) 50 60 80 100 120 150 200 300 400 500 600 750 1000 1200 1500 2000 2500 Dimensions L1 (2) 102 102 152 182 182 195 195 282 282 316 345 316 300 415 415 510 600 L2 (5) 124 124 174 204 204 217 217 304 304 338 367 338 325 440 440 535 625 L3 (3) 146 146 196 226 226 239 239 326 326 360 389 360 350 465 465 560 650 D (2) 28 28 28 28 28 40 40 40 40 50 40 50 60 60 60 60 60 B 6.5 6.5 6.5 6.5 6.5 8 8 8 8 8 8 8 8.5 8.5 8.5 8.5 8.5 B1 28 28 28 28 28 40 40 40 40 50 40 50 60 60 60 60 60 H1 (3) 61 61 61 61 61 81 81 81 81 101 81 101 119 119 119 119 119 H 28 28 28 28 28 41 41 41 41 45 41 45 60 60 60 60 60 N 10 10 10 10 10 12 12 12 12 16 12 16 16 16 16 16 16 d 4.5 4.5 4.5 4.5 4.5 5.5 5.5 5.5 5.5 6 5.5 6 6 6 6 6 6 O 1.2 1.2 1.2 1.2 1.2 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 How to Order TE 50 B 1K0 J Common Part Power Rating Mounting Resistance Value Tolerance TE - High Power Wire Wound Resistor Literature No. 9-1773453-2 Issued: 12-08 Dimensions are shown for reference purposes only. 50 60 80 100 - 50 Watt 60 Watt 80 Watt 100 Watt etc. Dimensions are in millimetres unless otherwise specified. A - Without Bracket B - With Bracket (Standard) 1 ohm (1000 milliohms) 1R0 10 ohm (10 ohms) 10R 100R ohms (100 ohms) 100R 1k ohms (1000 ohms) 1K0 Specifications subject to change. J - 5% K - 10% tycoelectronics.com passives.tycoelectronics.com